“JourneyTek Passive 3-piezo Pickup EP001K” has been added to your cart. View cart

Passive Soundhole Volume Wheel-EPA01

Name: Passive Soundhole Volume Wheel-EPA01
SKU: 677355853218
Availability: InStock

In stock (can be backordered)

$14.99

SKU: 677355853218

Passive volume wheel add-on for all upgradable JourneyTek passive pickups. This volume wheel installs within seconds to most of our upgradable JourneyTek passive piezo pickup units. It’s maintenance free, passive, and super easy to install. Impedance is 500k, with 2.5mm jack input.

NOTE: YOU MUST HAVE AN UPGRADABLE EP001K OR HAVE AN UPGRADEABLE JOURNEYTEK PICKUP ALREADY INSTALLED TO USE THIS VOLUME WHEEL. If you have an older model pickup, you’ll need to purchase a newer EP001K and install it to upgrade. Click HERE to learn how to tell if your existing pickup is upgradeable.

In stock (can be backordered)

We highly recommend our preamp! Pickup ships now, preamp ships in early January 2025.

DI-001K Journey Acoustic DI Preamp

(Shipping October 2025) A full-featured, rechargeable preamp for your acoustic guitar. The DI-001K Journey Acoustic DI Preamp is a premium quality, all-in-one acoustic preamp for musicians who want full control of their tone. The rechargeable battery allows you to produce a clean, transparent signal without the hassle of locating a power supply (but works while charging if you forget to charge it). This preamp pairs seamlessly with our EP001K and other passive pickup units to give you exceptional tonal control with a clean line level signal.

Add for $119.99

- +

SKU: 677355853218 Category: Electronics & Pickups

Description
Additional information
Media Gallery

Description

An easy to install add-on module for all newer passive pickups sold by Journey Instruments (EPOO1K, EPOO2K, EPOO3K & EP004K). You must have the latest pickup with the 2.5mm jack (see step 1) in order to utilize the volume control knob.

Dimensions:

Wheel Assembly:1.1 inches square. (28 x 28mm) 0.35 inches thick (9mm) – including the foam adhesive pad
Cable Length: 18 inches long (46cm)

Quick Installation Instructions:
(After loosening your strings on a fixed neck guitar, or removing the neck of your collapsible guitar)
1. Remove the 2.5mm male connector from the piezo elements from the instrument’s output jack.
2. Insert the 2.5mm male connector into the female receiving socket on the side of the EPA01 passive volume wheel.
3. Position the EPA01 passive volume wheel around your instrument’s soundhole so that the connectors do not press or bend against the bracing.

4. Insert the 2.5mm male connector at the end of the wire coming from the EPA01 passive volume wheel into the female receiving socket on the back of the output jack connector.
5. Plug the guitar into an amp, turn the amp on, then test the signal to the amplifier. You can do this by tapping on the soundboard and turning the wheel to adjust the volume. Unplug the cable and turn off the amp when done.
6. Remove the adhesive and adhere the EPA01 passive volume wheel at the tested location. Secure the loose wire to the side of the guitar. (on the same side you installed the volume wheel)
7. Re-attach the neck or tighten your strings and enjoy your maintenance-free passive volume control.

Additional information